Class 10.9 Zinc Plated Steel Hex Bolt, M20-2.5, 75mm Length (Pack of 10)

Class 10.9 Zinc Plated Steel Hex Bolt, M20-2.5, 75mm Length (Pack of 10) Reviews

Other Picture

Class 10.9 Zinc Plated Steel Hex Bolt, M20-2.5, 75mm Length (Pack of 10) Feature

• Hex Bolts feature a chamfered point
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Class 10.9 fasteners are typically made of a medium-carbon alloy steel that is quenched and tempered, with 830 MPa proof load and 1040 MPa tensile strength. It has superior hardness for usage in applications where strength is a primary concern. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Class 8.8 Zinc Plated Steel Hex Bolt, M12-1.75, 40mm Length (Pack of 50)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, M5-0.8, 16mm Length (Pack of 50)
• Steel Lock Nut, DIN, M3-0.5 (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Low Head, Hex Socket Drive, M12-1.75, 45mm Length (Pack of 10)

Detail Reviews

Sep 01, 2011 04:39:05

Zinc Plated Steel Carriage Bolt, Oval Head, 5/16"-18, 9" Length (Pack of 10)

Zinc Plated Steel Carriage Bolt, Oval Head, 5/16"-18, 9" Length (Pack of 10) Reviews

Other Picture

Zinc Plated Steel Carriage Bolt, Oval Head, 5/16"-18, 9" Length (Pack of 10) Feature

• Carriage Bolts have a domed head with a square neck to prevent spinning
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Oval head style for recessed finish with a slightly rounded surface
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Carriage Bolts or Carriage Screws have a square neck that keeps them from turning once tightened. Use in square holes for wood-to-wood and wood-to-metal fastening. Length is measured from under the head.

Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).

Similar to a flat-head style, the oval head style has a slightly convex top surface; it is typically used for appearance.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Grade 5 Zinc Plated Steel Carriage Bolt, Oval Head, 5/8"-11, 3-1/2" Length (Pack of 5)
• Grade 2 Zinc Plated Steel Hex Bolt, 1/4"-20, 4" Length (Pack of 5)
• Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #4-40, 1/2" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 3" Length (Pack of 25)
• Zinc Plated Steel Hex Nut, 5/16"-18 (Pack of 100)

Detail Reviews

Aug 29, 2011 14:01:06

Bx/50 x 1: Hillman Hex Bolts (811617)

Bx/50 x 1: Hillman Hex Bolts (811617) Reviews

Other Picture

Bx/50 x 1: Hillman Hex Bolts (811617) Feature

• Hot dip galvanized
• Boxed

Sold as one unit. (1 unit = Bx/50.) Hot dip galvanized. Boxed. 1/2" x 3". Manufacturer number: 811617. SKU #: 54873. Country of origin: Taiwan. Distributed by Hillman Group Rsc.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 28, 2011 13:46:06

Nylon 6/6 Hex Bolt, M12-1.75, 20mm Length (Pack of 50)

Nylon 6/6 Hex Bolt, M12-1.75, 20mm Length (Pack of 50) Reviews

Other Picture

Nylon 6/6 Hex Bolt, M12-1.75, 20mm Length (Pack of 50) Feature

• Hex Bolts feature a chamfered point
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon 6/6 Hex Bolt, 1/4"-20, 1" Length (Pack of 100)
• Nylon 6/6 Wing Nut, M4-0.7 (Pack of 100)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M6-1, 10mm Length (Pack of 100)

Detail Reviews

Aug 27, 2011 10:25:04

Grade 5 Zinc Plated Steel Hex Bolt, 1/2"-13, 4-3/4" Length (Pack of 10)

Grade 5 Zinc Plated Steel Hex Bolt, 1/2"-13, 4-3/4" Length (Pack of 10) Reviews

Other Picture

Grade 5 Zinc Plated Steel Hex Bolt, 1/2"-13, 4-3/4" Length (Pack of 10) Feature

• Hex Bolts feature a chamfered point
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Grade 5 fasteners are typically made of medium-carbon steel that is quenched and tempered for added strength. They are commonly used in the automotive industry and other situations in which strength is a moderate concern, and are grade-marked on the head with three radial lines. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Grade 2 Zinc Plated Steel Hex Bolt, 3/8"-16, 3" Length (Pack of 10)
• Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 5-1/2" Length (Pack of 5)
• Black Oxide Heat Treated Alloy Steel Socket Head Cap Screw, Hex Socket Drive, 1/4"-28, 7/8" Length (Pack of 100)
• Zinc Plated Steel Carriage Bolt, Oval Head, 3/8"-16, 1-1/2" Length (Pack of 10)
• Grade 9 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 4-1/2" Length (Pack of 5)

Detail Reviews

Aug 26, 2011 08:35:06

1'' x 5/16''-18 thread T-Bolt, 5 Pack

1'' x 5/16''-18 thread T-Bolt, 5 Pack Reviews

Other Picture

Customize your own jigs. The T-heads fit inside T-slot track or a groove routed with a T-slot router bit. Zinc-plated steel. Sold in packs of five.

Visit Store Now !!

Detail Products

• 1'' x 1/4''-20 thread T-Bolt, 5 Pack
• 1-1/2'' x 1/4''-20 thread T-Bolt, 5 Pack
• 2.5'' x 5/16''-18 thread T-Bolt, 5 Pack
• 1.5'' x 5/16''-18 thread T-Bolt, 5 Pack
• INCRA Build-It Knobs, 1/4-20 x 1 1/2" Bolts, Washers (Set of 8)

Detail Reviews

Aug 25, 2011 07:16:04

Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-24, 1-3/4" Length (Pack of 5)

Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-24, 1-3/4" Length (Pack of 5) Reviews

Other Picture

Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-24, 1-3/4" Length (Pack of 5) Feature

• Hex Bolts feature a chamfered point
• Coated with yellow zinc chromate for corrosion resistance
• Hex head for easy driving
• Length is measured from under the head
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Grade 8 fasteners are made of medium-carbon alloy steel that is quenched and tempered for added strength, with 120,000-130,000 PSI proof load and 150,000 PSI tensile strength. They have superior hardness for usage in applications where strength is a primary concern, and are grade-marked on the head with six radial lines. Yellow Zinc Chromate fasteners have been coated with zinc and with yellow chromate. As a result they offer corrosion resistance that is slightly higher than clear zinc.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Grade 9 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-16, 4-1/2" Length (Pack of 5)
• Grade 5 Zinc Plated Steel Hex Bolt, 1/2"-20, 4-1/2" Length (Pack of 25)
• Stainless Steel Hex Bolt, MIL-SPEC, 1/4"-20, 1/2" Length (Pack of 50)
• Zinc Plated Steel Carriage Bolt, Oval Head, 3/8"-16, 1-1/2" Length (Pack of 10)
• Stainless Steel 316 Hex Bolt, 1/4"-20, 1-3/4" Length (Pack of 25)

Detail Reviews

Aug 23, 2011 11:36:07

Jergens 44309 T-Slot Bolt, 4140 Forging Steel, 5/8-11 Thread x 10" Long

Jergens 44309 T-Slot Bolt, 4140 Forging Steel, 5/8-11 Thread x 10" Long Reviews

Other Picture

Jergens 44309 T-Slot Bolt, 4140 Forging Steel, 5/8-11 Thread x 10" Long Feature

• Thread: 2A-UNC
• Rc 32-36 heat treated
• These bolts are stronger than those made from plain steel
• Black-oxide finish provides lubricity and mild rust resistance

Protect your expensive machine table slots with Jergens T-Slot Bolts. The completely finished machined head provides at least 50% more bearing surface under your table slot. T-Slot Bolts outlast T-Bolts in wearability in most applications. Bolts won't twist or jam in slots.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 22, 2011 12:59:04

M10-1.5 X 20 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921 / 500 Pc. Carton

M10-1.5 X 20 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921 / 500 Pc. Carton Reviews

Other Picture

M10-1.5 X 20 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921 / 500 Pc. Carton Feature

• M10-1.5 X 20 Metric Flange Bolts
• Grade 8.8 Steel
• Zinc Plating
• DIN6921

M10-1.5 X 20 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921

Visit Store Now !!

Detail Products

Detail Reviews

Aug 21, 2011 08:12:08

Nylon 6/6 Hex Bolt, Slotted Drive, M6-1, 12mm Length (Pack of 100)

Nylon 6/6 Hex Bolt, Slotted Drive, M6-1, 12mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Hex Bolt, Slotted Drive, M6-1, 12mm Length (Pack of 100) Feature

• Hex Bolts feature a chamfered point
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon Hex Bolt, M10-1.5, 50mm Length (Pack of 25)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)

Detail Reviews

Aug 20, 2011 04:56:08

Nylon 6/6 Hex Bolt, Slotted Drive, M8-1.25, 16mm Length (Pack of 100)

Nylon 6/6 Hex Bolt, Slotted Drive, M8-1.25, 16mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Hex Bolt, Slotted Drive, M8-1.25, 16mm Length (Pack of 100) Feature

• Hex Bolts feature a chamfered point
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon Hex Bolt, M10-1.5, 50mm Length (Pack of 25)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)

Detail Reviews

Aug 18, 2011 20:32:06

Monel Hex Bolt, 1/4"-20, 1" Length (Pack of 5)

Monel Hex Bolt, 1/4"-20, 1" Length (Pack of 5) Reviews

Other Picture

Monel Hex Bolt, 1/4"-20, 1" Length (Pack of 5) Feature

• Hex Bolts feature a chamfered point
• Monel is especially suited to use near salt water
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Monel, also known as Nickel-Copper Alloy 400, has exceptional strength and resistance to heat and corrosion. It is slightly magnetic, and is especially well suited for use near salt water. In comparison to steel, Monel can be difficult to machine and needs to be worked at slow speeds. Rockwell hardness is a minimum of B80, and minimum tensile strength is 80,000 psi.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Carriage Bolt, Oval Head, 7/16"-14, 2" Length (Pack of 5)
• Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-24, 1/2" Length (Pack of 5)
• Stainless Steel Hex Bolt, MIL-SPEC, 5/16"-18, 1-1/4" Length (Pack of 10)
• Brass Hex Bolt, 1/2"-13, 1" Length (Pack of 5)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 1" Length (Pack of 100)

Detail Reviews

Aug 17, 2011 17:52:16

Stainless Steel 316 Hex Bolt, 1/4"-20, 3/8" Length (Pack of 25)

Stainless Steel 316 Hex Bolt, 1/4"-20, 3/8" Length (Pack of 25) Reviews

Other Picture

Stainless Steel 316 Hex Bolt, 1/4"-20, 3/8" Length (Pack of 25) Feature

• Hex Bolts feature a chamfered point
• Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Hex Bolt, MIL-SPEC, 5/16"-18, 1-1/4" Length (Pack of 10)
• Stainless Steel Hex Nut, 1/4"-20 (Pack of 100)
• Grade 8 Yellow Chromate Alloy Steel Hex Bolt, 3/8"-24, 1/2" Length (Pack of 5)
• Grade 9 Yellow Chromate Alloy Steel Hex Bolt, 1/2"-13, 4" Length (Pack of 5)
• Zinc Plated Steel Carriage Bolt, Oval Head, 7/16"-14, 2" Length (Pack of 5)

Detail Reviews

Aug 16, 2011 21:22:04