M6-1.0 X 10 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921 / 1,000 Pc. Carton

M6-1.0 X 10 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921 / 1,000 Pc. Carton Reviews

Other Picture

M6-1.0 X 10 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921 / 1,000 Pc. Carton Feature

• M6-1.0 X 10 Metric Flange Bolts
• Grade 8.8 Steel
• Zinc Plating
• DIN6921

M6-1.0 X 10 Metric Flange Bolts / Grade 8.8 / Zinc / RoHS / DIN6921

Visit Store Now !!

Detail Products

Detail Reviews

Oct 25, 2011 08:58:04

Stainless Steel Lag Bolt, Hex Head, 1/4", 3" Length (Pack of 50)

Stainless Steel Lag Bolt, Hex Head, 1/4", 3" Length (Pack of 50) Reviews

Other Picture

Stainless Steel Lag Bolt, Hex Head, 1/4", 3" Length (Pack of 50) Feature

• Ideal for fastening in wood
• Stainless Steel is suitable where formability and cost are important considerations
• Hex head for easy driving
• Length is measured from under the head

Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

Visit Store Now !!

Detail Products

• Galvanized Steel Lag Bolt, Hex Head, 5/16", 2-1/2" Length (Pack of 25)
• Stainless Steel 18-8 Flat Washer, ANSI, #5, 0.141" ID, 0.5" OD, 0.04" Thick (Pack of 100)
• Zinc Plated Steel Lag Bolt, Hex Head, 5/16", 3-1/2" Length (Pack of 10)
• Stainless Steel 18-8 Flat Washer, 1/4", 0.281" ID, 0.625" OD, 0.05" Thick (Pack of 100)
• Zinc Plated Steel Carriage Bolt, Oval Head, 5/16"-18, 7-1/2" Length (Pack of 5)

Detail Reviews

Oct 23, 2011 21:54:13

Nylon 6/6 Hex Bolt, M3-0.5, 4mm Length (Pack of 100)

Nylon 6/6 Hex Bolt, M3-0.5, 4mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Hex Bolt, M3-0.5, 4mm Length (Pack of 100) Feature

• Hex Bolts feature a chamfered point
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon 6/6 Wing Nut, M6-1 (Pack of 100)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M4-0.7, 25mm Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #4-40, 3/8" Length (Pack of 100)

Detail Reviews

Oct 22, 2011 20:52:07

S/S Strut Bolt FH 1/2-13 X 12

S/S Strut Bolt FH 1/2-13 X 12 Reviews

Other Picture

Strut bolts in standard thread flat head slotted drive. Made of 18-8 gauge stainless steel, strut bolts have 2-1/2" section of thread regardless of size, unlike machine bolts where length of thread varies between manufacturers.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 21, 2011 10:52:03

M8-1.25 X 40 Metric Flange Bolts / Grade 8.8 / Plain / DIN6921 / 500 Pc. Carton

M8-1.25 X 40 Metric Flange Bolts / Grade 8.8 / Plain / DIN6921 / 500 Pc. Carton Reviews

Other Picture

M8-1.25 X 40 Metric Flange Bolts / Grade 8.8 / Plain / DIN6921 / 500 Pc. Carton Feature

• M8-1.25 X 40 Metric Flange Bolts
• Grade 8.8 Steel
• Plain Finish
• DIN6921

M8-1.25 X 40 Metric Flange Bolts / Grade 8.8 / Plain / DIN6921

Visit Store Now !!

Detail Products

Detail Reviews

Oct 18, 2011 03:17:04

PFC 3/8" x 5-1/2" Hex Head Lag Screws Zinc Plated - 50 per Box

PFC 3/8" x 5-1/2" Hex Head Lag Screws Zinc Plated - 50 per Box Reviews

Other Picture

PFC 3/8" x 5-1/2" Hex Head Lag Screws Zinc Plated - 50 per Box Feature

• 3/8" Diameter
• 5-1/2" Length (Length is measured from under the head)
• Grade 1 Low Carbon Steel Hex Head Lag Screw (Meets SAE J429 & ASME B18.2.1)
• Zinc Plated to meet ASTM F1941 FeZn3A
• 50 per Box

PFC Hex Head Lag Screws - Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench. Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side. Length is measured from under the head. Fasteners are typically made of low-carbon steel.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 13, 2011 13:40:05

Zinc Plated Steel Lag Bolt, Hex Head, 1/2", 6" Length (Pack of 5)

Zinc Plated Steel Lag Bolt, Hex Head, 1/2", 6" Length (Pack of 5) Reviews

Other Picture

Zinc Plated Steel Lag Bolt, Hex Head, 1/2", 6" Length (Pack of 5) Feature

• Ideal for fastening in wood
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Hex head for easy driving
• Length is measured from under the head

Also known as Lag Bolts, Lag Screws come in longer lengths than wood screws and are easy to tighten with a wrench.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

Visit Store Now !!

Detail Products

• Galvanized Steel Lag Bolt, Hex Head, 5/8", 2" Length (Pack of 5)
• Zinc Plated Steel Carriage Bolt, Oval Head, 1/4"-20, 2-1/4" Length (Pack of 100)
• Heavy Duty Titanium Shelf Bracket, 22"
• Grade 5 Zinc Plated Steel Hex Bolt, 1/2"-13, 1-3/8" Length (Pack of 10)
• Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #4-40, 1/2" Length (Pack of 25)

Detail Reviews

Oct 12, 2011 04:59:06